STUDY ON THE SYNTHESIS OF g-C₃N₄/LaFeCuO₃ HYBRID MATERIALS FOR THE DEGRADATION OF CIPROFLOXACIN
DOI:
https://doi.org/10.18173/2354-1059.2025-0027Keywords:
g-C₃N₄/LaFeCuO₃ composite, persulfate activation, ciprofloxacin degradationAbstract
In this study, the photocatalysts g-C₃N₄, LaFeCuO₃, and the composite 10%g-C₃N₄/LaFeCuO₃ were prepared using a combination of sol-gel, pyrolysis, and ultrasonic-assisted synthesis methods.Their surface characteristics, including the crystal structure, elemental composition, morphology, optical absorption, and electron-hole recombination, were investigated through XRD, EDX, FE-SEM, UV-vis DRS, and photoluminescence (PL) spectroscopy. The role of ammonium persulfate agent (APS) in the degradation of ciprofloxacin (CIP) under light irradiation in the absence of photocatalysts was also examined. Results indicated that APS generated highly oxidative radicals (SO₄•⁻ and •OH), contributing significantly to the degradation of CIP. The optimal APS volume was 0.8 mL of 0.25M APS, achieving 82.35% CIP degradation after 180 minutes. In the presence of both APS and photocatalysts, LaFeCuO₃, g-C₃N₄, and 10%g-C₃N₄/LaFeCuO₃ materials achieved degradation efficiencies of 81.78%, 78.61%, and 96.3%, respectively, under the same experimental conditions, specifically, a CIP concentration of 20 ppm, photocatalyst loading of 1.5 g/L, and solution pH of 4.6. This improvement is attributed to the enhanced formation of free radicals facilitated by the presence of the photocatalysts.
References
[1] Do QT, Ha TH, Nguyen XL, Nguyen HP, Nguyen AT, Ngo TCQ & Chau HD, (2022). Study of the ciprofloxacin adsorption of activated carbon prepared from mangosteen peel. Applied Sciences, 12, 8770. https://doi.org/10.3390/app12178770
[2] Jara-Cobos L, Abad-Delgado D, Ponce-Montalvo J, Menendez M & Peñafiel ME, (2023). Removal of ciprofloxacin from an aqueous medium by adsorption on natural and hydrolyzed bentonites. Frontiers in Environmental Science, 11, 1239754. https://doi.org/10.3389/fenvs.2023.1239754
[3] Zhong X, Liu J, Jie H, Wu W & Jiang F, (2023). Highly efficient copper-doped LaFeO3 perovskite for bisphenol A removal by activating peroxymonosulfate. Catalysts, 13, 575. https://doi.org/10.3390/catal13030575
[4] Jiana J, Nahid MP, Peipei S, Chengjin C, Bin L, Vincenzo N, Wei J & Yaping Z, (2021). Highly efficient removal of bisphenol A by a novel Co-doped LaFeO3 perovskite/PMS system in salinity water. Science of The Total Environment, 801, 149490. https://doi.org/10.1016/j.scitotenv.2021.149490
[5] Yingzi L, Ningning S, Qingyu Z, Lei C, Shengbo S, Hong Y, Jing C, Qixuan W & Shuang X, (2023). Degradation of ciprofloxacin by a constitutive g-C3N4/BiOCl heterojunction under a persulfate system. RSC Advances, 13, 4361–4375. https://doi.org/10.1039/D2RA06500B
[6] Wang D, Luo X, Yang S & Xue G, (2021). Tourmaline/Perovskite composite material as heterogeneous catalysts for activation of peroxymonosulfate to remove organic dye in water. Journal of Environmental Chemical Engineering, 9(3), 105221. https://doi.org/10.1016/j.jece.2021.105221
[7] Sen L, Guanlong W, Shuo C, Hongtao Y, Fei Y & Xie Q, (2018). Heterogeneous activation of peroxymonosulfate by LaCo1–xCuxO3 perovskites for degradation of organic pollutants. Journal of Hazardous Materials, 353, 401–409. https://doi.org/10.1016/j.jhazmat.2018.04.021
[8] Shen H, Xue T, Wang Y, Cao G, Lu Y & Fang G, (2016). Photocatalytic property of perovskite LaFeO3 synthesized by sol-gel process and vacuum microwave calcination. Materials Research Bulletin, 84, 15–24.
[9] Vasudha H, Nguyen VH, Ajay K, Pankaj R, Venkata K, Aftab APK, Pardeep S, Eric L, Chuanyi W & Pham TH, (2021). Advanced activation of persulfate by polymeric g-C3N4 based photocatalysts for environmental remediation: A review. Journal of Hazardous Materials, 413, 125324. https://doi.org/10.1016/j.jhazmat.2021.125324
[10] Hongyu L, Feilin Z, Xiaowei L, Wenjing Z, Ling Z, Chengxun D, Zhimin Y, Olivier M & Peng C, (2024). Z-scheme g-C3N4/α-FOD heterojunction-assisted persulfate activation for degradation of tetracycline hydrochloride under visible light: Insights into the mechanism. Chemical Engineering Journal, 479, 147224. https://doi.org/10.1016/j.cej.2023.147224
[11] Mohd I, Ahmad ZA, Mohammad EK & Akbar M, (2025). A focused review on photocatalytic potential of graphitic carbon nitride (g-C3N4) based metal oxide-nanostructures for effective remediation of most overused antibiotics. Journal of Environmental Management, 373, 123759. https://doi.org/10.1016/j.jenvman.2024.123759
[12] Weijin Z, Yongxiang M, Xiuhua Z, Shujie L, Tao A, Jinyu B, Xiaoying H & Hongwei T, (2021). Fabrication of Ag decorated g-C3N4/LaFeO3 Z-scheme heterojunction as a highly efficient visible-light photocatalyst for degradation of methylene blue and tetracycline hydrochloride. Journal of Alloys and Compounds, 864, 158914. https://doi.org/10.1016/j.jallcom.2021.158914
[13] Humayun M, Bahadur A, Khan A & Bououdina M, (2023). Exceptional photocatalytic performance of the LaFeO3/g-C3N4 Z-scheme heterojunction for water splitting and organic dyes degradation. Catalysts, 13, 907. https://doi.org/10.3390/catal13050907
[14] Ghanbari F & Moradi M, (2016). Application of peroxymonosulfate and its activation methods for degradation of environmental organic pollutants: Review. Chemical Engineering Journal, 310, 41–61. https://doi.org/10.1016/j.cej.2016.10.064
[15] Iyi X, Yu L, Lu F, Yingxi W & Ling L, (2021). Degradation of organic dyes by peroxymonosulfate activated with water-stable iron-based metal organic frameworks. Journal of Colloid and Interface Science, 589, 298–307. https://doi.org/10.1016/j.jcis.2020.12.123
